|
|
|
|
|
|
|
|
|
|||||||
| R.I.P for PC Version 2.0.0 Full version
Racegun Interface program (RIP) version 2.0.0 can only be used with Firmware 4.0.0 - Tested on Windows XP and Windows 2000 Use winzip/winrar to unpack the content of the file to a folder on your PC - then run the setup program to install the application on your PC. If you already have a R.I.P. uninstall all other R.I.P. application. |
 |
| |||||
| Firmware version 4.0.0
This is the latest full firmware for the leaf boards (hardware version 2). New firing modes and enhanced A.C.E. routines Note using the enhaced and full auto modes might not be legal in your country of residence - please use firmware 2.0.26 if you are in doubt DOO NOT LOAD THE 4.0.0 FIRMWARE INTO A DOMESWITCH BOARD |
|
| |||||
| 5 minut timing guide
The stepp by stepp guide that's explaining how to time your gun. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| R.I.P for PC Version 1.0.3 Full version
Racegun Interface program version 1.0.3 with support for new firingmodes found in Firmware 2.0.25 - Tested on Windows XP and Windows 2000 Use winzip version 8.1 or Windows XP to unzip the content of the file to a folder on your PC - then run the setup program to install the application on your PC. If you already have a R.I.P. installed on your system please use the R.I.P. upgrade or uninstall the old version before installing this one. The zip file includes new documentation about how to use the grip and the R.I.P. software also take a look at the readme file to find information about this new release |
|
| |||||
| R.I.P. for PC Upgrade from version 1.0.X to 1.0.3
If you already have the release version of an earlier R.I.P. on your PC you can download this upgrade. Use winzip version 8.1 or Windows XP to unzip the content of the file to a folder on your PC - then run the setup program to install the application on your PC. The zip file includes new documentation about how to use the grip and the R.I.P. software also take a look at the readme file to find information about this new release |
|
| |||||
| R.I.P. 1.0.2. For Palm PDA's - Latest Version
Racegun Interface Program version 1.0.2 for the Palm PDA's - Requires booster software which can be downloaded from www.appforge.com free of charge for Palm PDA's Use winzip version 8.1 or Windows XP to unzip the content of the file to a folder on your PC or Mac - Use the Palm Install utility to install the application on your Palm. The zip file includes new documentation about how to use the grip and the R.I.P. software also take a look at the readme files to find information about this new release. |
|
| |||||
| Firmware version 2.0.25
This is the latest full firmware for the leaf boards (hardware version 2). New firing modes and enhanced A.C.E. routines - see readme file for more information Use Winzip 8.1 or Windows XP to unzip the files to a folder on your PC and then use the Racegun Interface Program to update the firmware in your grip. |
|
| |||||
| Firmware version 2.0.26
This is a Semi only firmware with support for Semi and classic mode only - all other features are like the 2.0.25 firmware. If you select another firingmode in the R.I.P. software (like Hyper mode) this firmware will set the grip to run in default mode (classic). Use Winzip 8.1 or Windows XP to unzip the files to a folder on your PC and then use the Racegun Interface Program to update the firmware in your grip. This is the firmware that Racegun recommends you use if you are playing on the tournament circuit since it does not support any tournament "illegal" modes. This is also the firmware that must be used in countries that does not allow full auto modes. |
|
| |||||
| R.I.P.for PC manual
This is the manual explaining all the available options in the R.I.P. software and how to adjust your grip. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| Freekick adjustment guide
Learn how to adjust your Freekick by reading this guide. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| Operating the grip
This guide explains how to operate the Racegun grip. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| Grip Install guide - Old SMC valve
Step by step guide on how to install the grip on your marker. Please note that this is for the old style SMC valve (the RAM hoses needs to be reversed on the new smaller valve). Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| ACE install guide
This guide explains how to install the basic Anti Chop Eye (ACE) for the Racegun grip. Note this operation requires some prescision drilling and soldering. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| Modify grip to accept a leaf board
This file contains the drawing needed for milling the old (dome) grips to accept the new leaf board. |
|
| |||||
| Full grip manual (not up to date)
This is the full manual for the first release of the Racegun grip. The manual is slightly outdated but still contains a lot of good background information. Requires Adobe Acrobat Reader which can be found at www.adobe.com |
|
| |||||
| Firmware version 2.0.5
|
|
| |||||
| Firmware version 1.1.84
|
|
| |||||
| Firmware version 2.0.4
Firmware 2.0.4 - no support for changing the load time directly from grip |
|
| |||||
| Firmware version 2.0.10
|
|
| |||||
| Racegun Interface Program for PC Beta version 0.2.28
This is the first release of the R.I.P. for PC - this software might be needed to upgrade firmware in grips with very early firmware version like 1.1.13. This software is not feature complete and should only be used to upgrade the firmware of the old grip to 1.1.84. |
|
| |||||
| Copyright 2004 Raceguns.dk || Design/Hosting PcDaddy.dk |
